Sucker Rod & Pumping Equipment

Cone Packing

Pipe Wiper

Rod Guide

Swab Cup

Oil Saver Rubber

Stripper Rubber

No. 212 Blowout Preventer

Ratigan's flagship well control product, designed for maximum safety when swabbing or running rods in wells that head or flow under pressure. Manufactured from high-pressure electric steel with retractable, field-replac…

No. 176 Stuffing Box

A wellhead sealing device that surrounds the polished rod where it enters the tubing at surface, preventing produced fluids and gas from escaping around the reciprocating rod. A well-established Ratigan product referenc…

No. 176-1B Lubricating Cap

Threaded cap accessory for the No. 176 Stuffing Box providing a grease fitting to keep the packing properly lubricated during operation. Regular lubrication reduces friction, heat, and wear on both packing and polished…

No. 204 / 50 / 76-2 Polish Rod Clamps

Forged steel clamps that grip the polished rod to transfer the upstroke load from the carrier bar to the rod string. Ratigan's Sure-Grip clamp design — featured on the cover of their 1947 catalog — is a signature produc…

No. 106 Sucker Rod Elevator

A hinged lifting device that latches around the sucker rod body or coupling to suspend the rod string during pulling and running operations. The elevator attaches to the hook or bail, allowing rods to be lifted one stan…

No. 238 Transfer Elevator

A hinged elevator used to transfer tubing or rod stands between the well center and the catwalk during pulling and running operations. The design allows efficient lateral transfer of pipe without manual handling on the…

No. 51 Utility Hook

A heavy-duty forged steel hook used in general well-servicing operations for lifting rods, tubing, and other downhole equipment. A core product in the Ratigan catalog, referenced by distributors including Pickford and P…

No. 14 Triangle C Link

A forged steel C-shaped link used to connect the carrier bar or bridle to the polished rod clamp on a sucker rod pumping unit. The triangular shape provides a secure, load-bearing connection between the walking beam ass…

No. 79 Swivel Link

A rotating link inserted between the carrier bar and the polished rod clamp to allow the rod string to turn freely without transmitting torque to the pumping unit structure. Prevents rod string rotational stress from be…

No. 142 Stringing Up Link

A temporary link used during initial rig-up of a pumping unit to connect the walking beam to the rod string while aligning and tensioning the bridle system. Provides an adjustable connection point at the horsehead durin…

Carrier Bar

The horizontal steel bar suspended from the horsehead bridle wires that connects the pumping unit's walking beam to the polished rod clamp. Transmits the full reciprocating load and serves as the mounting point for poli…

No. 102 Adjustable Swivel Line Weight

A weighted device attached to the carrier bar assembly on a sucker rod pumping unit to provide downstroke counterbalance and stabilize the rod line. The adjustable swivel design allows the line weight to orient freely w…

No. 111 Shock Absorber

A spring-loaded dampening device installed between the carrier bar and polished rod clamp to absorb peak dynamic loads caused by fluid pound, gas interference, or pump-off conditions. Reduces wear on the rod string and…

No. 220 Shock Absorber

A mid-range shock absorber in Ratigan's three-model lineup, designed to dampen dynamic rod string loads and reduce peak stress on the pumping unit, rod string, and downhole pump during production operations.

No. 226 Shock Absorber

The heavy-duty model in Ratigan's shock absorber lineup, designed for higher-load applications with deeper wells, heavier fluid loads, or severe pump-off conditions. Provides maximum dynamic stress attenuation for exten…

No. 28 Brass Non-Spark Bell Nipple

A flared brass nipple installed at the top of the tubing string below the stuffing box, guiding the polished rod into the well and providing a smooth, non-sparking transition. Brass construction prevents ignition hazard…

No. 144 Rod Wiper

A sealing wiper element that surrounds the polished rod above the stuffing box to scrape paraffin, scale, and produced fluid off the rod surface as it reciprocates. Keeps the stuffing box packing clean and extends packi…

No. 184 Paraffin Scraper

A mechanical scraper run on the sucker rod string to remove paraffin wax deposits from the inner walls of the production tubing. Paraffin accumulation restricts flow and reduces production rates — regular scraping maint…

No. 60 Snap-Type Rod Wrench

A snap-action wrench designed for fast, one-handed engagement on sucker rod couplings. The snap mechanism allows the wrench to open and close quickly around the rod body without threading, improving efficiency when maki…

No. 103/156 Wheel-Type Safety Rod Wrench

A rod wrench featuring a wheel ratcheting mechanism for improved leverage and operator safety when spinning sucker rod couplings. The safety design reduces the risk of slippage and hand injuries common with conventional…

No. 129 Polished Rod Grip Wrench

A specialized wrench with hardened gripping jaws designed to clamp firmly on the smooth surface of a polished rod without slipping or damaging the rod finish. Used to hold the rod stationary during coupling makeup and b…

No. 137 Sucker Rod Wrench

A fixed-jaw wrench engineered for making up and breaking out sucker rod couplings in the field. Purpose-built for the flat surfaces on API rod couplings, providing maximum torque without rounding the coupling shoulders.

No. 92 Tubing Tong

A heavy-duty pipe tong used to make up and break out tubing connections during completion, workover, and production operations. Designed for standard API tubing sizes in the smaller OD range.

No. 214 Tubing Tong

A companion tubing tong to the No. 92, designed for larger tubing OD ranges. Used for making up and breaking out API tubing connections during workover and production operations.

No. 231 Backoff Wrench

A specialized wrench providing high-leverage mechanical advantage for loosening stuck or corroded sucker rod couplings and tubing connections that resist normal torque tools. Essential for workover operations dealing wi…

API 11AX Rod Pumps

Pump Barrels

Downhole Pump Parts

Plated Barrels

Polished Rods

Sinker Bars

Polished Rod Liners

Wellheads & Blowout Preventers

Stuffing Boxes

Pumping & Flow Tees

Rubber Products

Plug Valves

Pipe Repair Clamps